Root/
| File | Age | Rev | Message | Size | |
|---|---|---|---|---|---|
| .. | |||||
 |
82802ab.c | 2 years 11 months | 595 | hailfinger: flashrom only checks for very few chips if the erase worked. And even when it checks if the erase worked, the result of that check is often ignored. Convert all erase functions and actually check return codes almost everywhere. Check inside all erase_* routines if erase worked, not outside. erase_sector_jedec and erase_block_jedec have changed prototypes to enable erase checking. Uwe successfully tested LPC on an CK804 box and SPI on some SB600 box. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Signed-off-by: Urja Rannikko <urjaman@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> | 5.79 kB |
|
am29f040b.c | 2 years 11 months | 595 | hailfinger: flashrom only checks for very few chips if the erase worked. And even when it checks if the erase worked, the result of that check is often ignored. Convert all erase functions and actually check return codes almost everywhere. Check inside all erase_* routines if erase worked, not outside. erase_sector_jedec and erase_block_jedec have changed prototypes to enable erase checking. Uwe successfully tested LPC on an CK804 box and SPI on some SB600 box. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Signed-off-by: Urja Rannikko <urjaman@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> | 3.58 kB |
|
board_enable.c | 2 years 9 months | 683 | stepan: oops. MSR accesses in board specific code. I missed those. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> | 35.31 kB |
|
cbtable.c | 2 years 9 months | 671 | hailfinger: Remove unnecessary #include files. Serprog compilation is now controlled by a Makefile variable. Replace munmap with physunmap where appropriate. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de> | 6.53 kB |
|
chipset_enable.c | 2 years 9 months | 685 | hailfinger: Allow the user to override FWH IDSEL on ICH6 and later. Usage: flashrom -p internal=fwh_idsel=0 Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Log: flashrom v0.9.0-r670 coreboot table found at 0xcf7f3c00. Vendor ID: KONTRON, part ID: 986LCD-M Found chipset "Intel ICH7/ICH7R", enabling flash write... Setting IDSEL=0 for top 8 MBOK. This chipset supports the following protocols: LPC,FWH. Disabling flash write protection for board "Kontron 986LCD-M"... OK. Calibrating delay loop... OK. Found chip "SST SST49LF016C" (2048 KB, FWH) at physical address 0xffe00000. No operations were specified. Acked-by: Chris Kinney <cmkinne@sandia.gov> | 32.84 kB |
|
COPYING | 4 years 8 months | 134 | uwe: Original v2 revision: 2764 Add a copy of the GPL in the flashrom repository as it's an independent project (being packaged by distros, among other things). Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> | 17.99 kB |
|
coreboot_tables.h | 2 years 11 months | 586 | uwe: Add missing GPL headers to two files. Please complain in case there are errors here, but I'm pretty sure the headers are correct. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> | 4.73 kB |
|
dummyflasher.c | 2 years 9 months | 679 | hailfinger: Use a common parameter variable for all programmers. This allows us to reduce #ifdef clauses a lot if we compile out some programmers completely. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de> | 4.39 kB |
|
en29f002a.c | 2 years 11 months | 595 | hailfinger: flashrom only checks for very few chips if the erase worked. And even when it checks if the erase worked, the result of that check is often ignored. Convert all erase functions and actually check return codes almost everywhere. Check inside all erase_* routines if erase worked, not outside. erase_sector_jedec and erase_block_jedec have changed prototypes to enable erase checking. Uwe successfully tested LPC on an CK804 box and SPI on some SB600 box. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Signed-off-by: Urja Rannikko <urjaman@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> | 3.25 kB |
|
flash.h | 2 years 9 months | 681 | hailfinger: Allow to compile out serprog completely. If CONFIG_SERPROG is not set, no stubs and no data of serprog will remain. Side benefit: This kills a few dozen lines of code. r678, r679 and r680 made this possible. Once "Only list available programers in usage()" is committed, even the usage message will be adjusted automatically. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de> | 22.02 kB |
|
flashchips.c | 2 years 9 months | 674 | hailfinger: Add IDs for 25 AMD chips, 11 Hynix chips, 8 Sharp chips, and their variants. AM29DL400BB, AM29DL400BT, AM29DL800BB, AM29DL800BT, AM29F004BB AM29F004BT, AM29F200BB, AM29F200BT, AM29F400BB, AM29F400BT AM29F800BB, AM29F800BT, AM29LV002BB, AM29LV002BT, AM29LV004BB AM29LV004BT, AM29LV008BB, AM29LV008BT, AM29LV080B, AM29LV200BB AM29LV200BT, AM29LV400BB, AM29LV400BT, AM29LV800BB, AM29LV800BT HY29F002, HY29F040A, HY29F080, HY29F400B, HY29F400T, HY29F800B HY29F800T, HY29LV400B, HY29LV400T, HY29LV800B, HY29LV800T LH28F008BJxxPB, LH28F008BJxxPT, LH28F008SA, LH28F008SC, LH28F800BVxxBTL LH28F800BVxxBV, LH28F800BVxxTV, LHF00L02 Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de> | 75.43 kB |
|
flashchips.h | 2 years 9 months | 674 | hailfinger: Add IDs for 25 AMD chips, 11 Hynix chips, 8 Sharp chips, and their variants. AM29DL400BB, AM29DL400BT, AM29DL800BB, AM29DL800BT, AM29F004BB AM29F004BT, AM29F200BB, AM29F200BT, AM29F400BB, AM29F400BT AM29F800BB, AM29F800BT, AM29LV002BB, AM29LV002BT, AM29LV004BB AM29LV004BT, AM29LV008BB, AM29LV008BT, AM29LV080B, AM29LV200BB AM29LV200BT, AM29LV400BB, AM29LV400BT, AM29LV800BB, AM29LV800BT HY29F002, HY29F040A, HY29F080, HY29F400B, HY29F400T, HY29F800B HY29F800T, HY29LV400B, HY29LV400T, HY29LV800B, HY29LV800T LH28F008BJxxPB, LH28F008BJxxPT, LH28F008SA, LH28F008SC, LH28F800BVxxBTL LH28F800BVxxBV, LH28F800BVxxTV, LHF00L02 Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de> | 16.83 kB |
|
flashrom.8 | 2 years 9 months | 669 | stepan: The project's new home is flashrom.org now. Change all occurences in the source code and documentation accordingly. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> | 8.21 kB |
|
flashrom.c | 2 years 9 months | 684 | hailfinger: Generate the usage message by walking the list of available programmers. This makes sure compiled out programmers are not listed. Tested, usage output is identical to the hardcoded variant. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de> | 24.96 kB |
|
ft2232_spi.c | 2 years 9 months | 679 | hailfinger: Use a common parameter variable for all programmers. This allows us to reduce #ifdef clauses a lot if we compile out some programmers completely. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de> | 8.15 kB |
|
ichspi.c | 2 years 9 months | 671 | hailfinger: Remove unnecessary #include files. Serprog compilation is now controlled by a Makefile variable. Replace munmap with physunmap where appropriate. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de> | 19.12 kB |
|
internal.c | 2 years 9 months | 678 | hailfinger: FT2232 and IT87 programmers used functions of the dummy programmer instead of fallback functions. The dummy programmer is a "real" programmer with possible side effects and its functions should not be abused by other programmers. Make FT2232 and IT87 use official fallback functions instead. Create fallback_shutdown(). Create fallback_chip_writeb(). Convert the programmer #defines to an enum. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de> | 6.52 kB |
|
it87spi.c | 2 years 9 months | 679 | hailfinger: Use a common parameter variable for all programmers. This allows us to reduce #ifdef clauses a lot if we compile out some programmers completely. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de> | 8.19 kB |
|
jedec.c | 2 years 9 months | 660 | hailfinger: Verbose probe output is split across multiple lines for some probe functions. This makes visual inspection and grepping a lot harder than necessary. Remove line breaks where appropriate. Some error messages should end up on stderr instead of just being displayed in verbose mode. Thanks to Maciej Pijanka for testing. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de> | 9.10 kB |
|
layout.c | 2 years 11 months | 579 | hailfinger: Sometimes we want to read/write more than 4 bytes of chip content at once. Add chip_{read,write}n to the external flasher infrastructure which read/write n bytes at once. Fix a few places where the code used memcpy/memcmp although that is strictly impossible with external flashers. Place a FIXME in the layout.c code because usage is not totally clear and needs to be fixed to support external flashers. As a nice side benefit, we get a noticeable speedup for builtin flash reading which is now a memcpy() of the full flash area instead of a series of single-byte reads. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Urja Rannikko <urjaman@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> | 6.19 kB |
|
m29f002.c | 2 years 11 months | 595 | hailfinger: flashrom only checks for very few chips if the erase worked. And even when it checks if the erase worked, the result of that check is often ignored. Convert all erase functions and actually check return codes almost everywhere. Check inside all erase_* routines if erase worked, not outside. erase_sector_jedec and erase_block_jedec have changed prototypes to enable erase checking. Uwe successfully tested LPC on an CK804 box and SPI on some SB600 box. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Signed-off-by: Urja Rannikko <urjaman@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> | 3.55 kB |
|
m29f400bt.c | 2 years 11 months | 595 | hailfinger: flashrom only checks for very few chips if the erase worked. And even when it checks if the erase worked, the result of that check is often ignored. Convert all erase functions and actually check return codes almost everywhere. Check inside all erase_* routines if erase worked, not outside. erase_sector_jedec and erase_block_jedec have changed prototypes to enable erase checking. Uwe successfully tested LPC on an CK804 box and SPI on some SB600 box. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Signed-off-by: Urja Rannikko <urjaman@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> | 6.93 kB |
|
Makefile | 2 years 8 months | 686 | hailfinger: Fix compilation on Nexenta which is Ubuntu with a Solaris kernel. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de> | 5.74 kB |
|
mx29f002.c | 2 years 10 months | 606 | hailfinger: Kill dead code which has been disabled since the very first commit of flashrom. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Ronald G. Minnich <rminnich@gmail.com> | 2.62 kB |
|
nic3com.c | 2 years 9 months | 679 | hailfinger: Use a common parameter variable for all programmers. This allows us to reduce #ifdef clauses a lot if we compile out some programmers completely. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de> | 3.71 kB |
|
pcidev.c | 2 years 9 months | 679 | hailfinger: Use a common parameter variable for all programmers. This allows us to reduce #ifdef clauses a lot if we compile out some programmers completely. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de> | 3.40 kB |
|
physmap.c | 2 years 9 months | 677 | stepan: Fix up MSR handling in flashrom to support more OSes than Linux. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> | 5.50 kB |
|
pm29f002.c | 2 years 11 months | 595 | hailfinger: flashrom only checks for very few chips if the erase worked. And even when it checks if the erase worked, the result of that check is often ignored. Convert all erase functions and actually check return codes almost everywhere. Check inside all erase_* routines if erase worked, not outside. erase_sector_jedec and erase_block_jedec have changed prototypes to enable erase checking. Uwe successfully tested LPC on an CK804 box and SPI on some SB600 box. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Signed-off-by: Urja Rannikko <urjaman@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> | 1.66 kB |
|
pm49fl00x.c | 2 years 10 months | 608 | hailfinger: Kill obsolete exclude range feature. It is ignored by almost every chip and does not work for external flashers. Plus, it gives the user a false sense of security in some corner cases. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> | 3.18 kB |
|
print.c | 2 years 9 months | 659 | hailfinger: Eliminate version string duplication. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de> | 33.67 kB |
|
README | 2 years 8 months | 686 | hailfinger: Fix compilation on Nexenta which is Ubuntu with a Solaris kernel. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de> | 2.93 kB |
|
satasii.c | 2 years 9 months | 679 | hailfinger: Use a common parameter variable for all programmers. This allows us to reduce #ifdef clauses a lot if we compile out some programmers completely. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de> | 3.24 kB |
|
sb600spi.c | 2 years 9 months | 673 | hailfinger: Some SPI chip drivers and the generic 1-byte SPI chip write functions didn't include the automatic erase present in other chip drivers. Since the majority is definitely auto-erase, change the remaining explicit-erase cases to be auto-erase as well. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Carlos Arnau Perez <cemede@gmail.com> | 5.37 kB |
|
serprog-protocol.txt | 2 years 9 months | 656 | hailfinger: Support for an external serial flasher protocol. Supports RS-232, USB serial converters (untested) and TCP streams. The protocol specification is in serprog-protocol.txt There will be tweaks to the code and maybe the protocol in the future, so the API is not set in stone yet. Signed-off-by: Urja Rannikko <urjaman@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> | 5.87 kB |
|
serprog.c | 2 years 9 months | 681 | hailfinger: Allow to compile out serprog completely. If CONFIG_SERPROG is not set, no stubs and no data of serprog will remain. Side benefit: This kills a few dozen lines of code. r678, r679 and r680 made this possible. Once "Only list available programers in usage()" is committed, even the usage message will be adjusted automatically. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de> | 22.78 kB |
|
sharplhf00l04.c | 2 years 11 months | 595 | hailfinger: flashrom only checks for very few chips if the erase worked. And even when it checks if the erase worked, the result of that check is often ignored. Convert all erase functions and actually check return codes almost everywhere. Check inside all erase_* routines if erase worked, not outside. erase_sector_jedec and erase_block_jedec have changed prototypes to enable erase checking. Uwe successfully tested LPC on an CK804 box and SPI on some SB600 box. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Signed-off-by: Urja Rannikko <urjaman@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> | 4.93 kB |
|
spi.c | 2 years 9 months | 673 | hailfinger: Some SPI chip drivers and the generic 1-byte SPI chip write functions didn't include the automatic erase present in other chip drivers. Since the majority is definitely auto-erase, change the remaining explicit-erase cases to be auto-erase as well. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Carlos Arnau Perez <cemede@gmail.com> | 26.79 kB |
|
spi.h | 2 years 10 months | 653 | hailfinger: Use a distinct return code for SPI commands with unsupported/invalid length. Some drivers support only a few combinations of read/write length and return error otherwise. Having a distinct return code for this error means we can handle it in upper layers. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de> | 3.14 kB |
|
sst28sf040.c | 2 years 11 months | 595 | hailfinger: flashrom only checks for very few chips if the erase worked. And even when it checks if the erase worked, the result of that check is often ignored. Convert all erase functions and actually check return codes almost everywhere. Check inside all erase_* routines if erase worked, not outside. erase_sector_jedec and erase_block_jedec have changed prototypes to enable erase checking. Uwe successfully tested LPC on an CK804 box and SPI on some SB600 box. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Signed-off-by: Urja Rannikko <urjaman@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> | 4.20 kB |
|
sst49lf040.c | 2 years 11 months | 595 | hailfinger: flashrom only checks for very few chips if the erase worked. And even when it checks if the erase worked, the result of that check is often ignored. Convert all erase functions and actually check return codes almost everywhere. Check inside all erase_* routines if erase worked, not outside. erase_sector_jedec and erase_block_jedec have changed prototypes to enable erase checking. Uwe successfully tested LPC on an CK804 box and SPI on some SB600 box. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Signed-off-by: Urja Rannikko <urjaman@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> | 2.14 kB |
|
sst49lfxxxc.c | 2 years 9 months | 671 | hailfinger: Remove unnecessary #include files. Serprog compilation is now controlled by a Makefile variable. Replace munmap with physunmap where appropriate. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de> | 5.46 kB |
|
sst_fwhub.c | 2 years 11 months | 595 | hailfinger: flashrom only checks for very few chips if the erase worked. And even when it checks if the erase worked, the result of that check is often ignored. Convert all erase functions and actually check return codes almost everywhere. Check inside all erase_* routines if erase worked, not outside. erase_sector_jedec and erase_block_jedec have changed prototypes to enable erase checking. Uwe successfully tested LPC on an CK804 box and SPI on some SB600 box. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Signed-off-by: Urja Rannikko <urjaman@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> | 4.39 kB |
|
stm50flw0x0x.c | 2 years 11 months | 595 | hailfinger: flashrom only checks for very few chips if the erase worked. And even when it checks if the erase worked, the result of that check is often ignored. Convert all erase functions and actually check return codes almost everywhere. Check inside all erase_* routines if erase worked, not outside. erase_sector_jedec and erase_block_jedec have changed prototypes to enable erase checking. Uwe successfully tested LPC on an CK804 box and SPI on some SB600 box. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Signed-off-by: Urja Rannikko <urjaman@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> | 7.59 kB |
|
udelay.c | 2 years 11 months | 578 | hailfinger: Add external programmer delay functions so external programmers can handle the delay on their own if needed. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Urja Rannikko <urjaman@gmail.com> | 1.84 kB |
|
w29ee011.c | 2 years 9 months | 660 | hailfinger: Verbose probe output is split across multiple lines for some probe functions. This makes visual inspection and grepping a lot harder than necessary. Remove line breaks where appropriate. Some error messages should end up on stderr instead of just being displayed in verbose mode. Thanks to Maciej Pijanka for testing. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de> | 2.15 kB |
|
w39v040c.c | 2 years 11 months | 595 | hailfinger: flashrom only checks for very few chips if the erase worked. And even when it checks if the erase worked, the result of that check is often ignored. Convert all erase functions and actually check return codes almost everywhere. Check inside all erase_* routines if erase worked, not outside. erase_sector_jedec and erase_block_jedec have changed prototypes to enable erase checking. Uwe successfully tested LPC on an CK804 box and SPI on some SB600 box. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Signed-off-by: Urja Rannikko <urjaman@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> | 2.67 kB |
|
w39v080fa.c | 2 years 11 months | 595 | hailfinger: flashrom only checks for very few chips if the erase worked. And even when it checks if the erase worked, the result of that check is often ignored. Convert all erase functions and actually check return codes almost everywhere. Check inside all erase_* routines if erase worked, not outside. erase_sector_jedec and erase_block_jedec have changed prototypes to enable erase checking. Uwe successfully tested LPC on an CK804 box and SPI on some SB600 box. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Signed-off-by: Urja Rannikko <urjaman@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> | 5.25 kB |
|
w49f002u.c | 2 years 11 months | 595 | hailfinger: flashrom only checks for very few chips if the erase worked. And even when it checks if the erase worked, the result of that check is often ignored. Convert all erase functions and actually check return codes almost everywhere. Check inside all erase_* routines if erase worked, not outside. erase_sector_jedec and erase_block_jedec have changed prototypes to enable erase checking. Uwe successfully tested LPC on an CK804 box and SPI on some SB600 box. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Signed-off-by: Urja Rannikko <urjaman@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> | 1.52 kB |
|
wbsio_spi.c | 2 years 9 months | 673 | hailfinger: Some SPI chip drivers and the generic 1-byte SPI chip write functions didn't include the automatic erase present in other chip drivers. Since the majority is definitely auto-erase, change the remaining explicit-erase cases to be auto-erase as well. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Carlos Arnau Perez <cemede@gmail.com> | 5.84 kB |
svn co -r HEAD https://code.coreboot.org/svn/flashrom/trunk 